TBS CHUPITO 800MM-PNP-CRASH A LOT KIT
Who doesn’t hate waiting for spares?! The TBS Chupito 800mm FPV Airplane – PNP – Crash-A-Lot comes with one set of spare foam parts. That’s two full Chupito foam parts, one set of hardware, and one set of electronics. Perfect for people who want to mercilessly punish their Chupito without fear or downtime.
The TBS Chupito is a compact forward-swept FPV flying wing platform that stays true to its heritage of the TBS Mojito. We gently eased off the focus on efficiency and toned the complexity down a notch or two to make it more approachable and easier to fly for casual pilots. The cruise speed is still a respectable 70km/h, while the top speed on the stock setup will allow 160km/h. It will give you a comfortable 20mins/15km of casual flying on a 1300mAh 6S battery, and it’s quiet enough not to bother your neighbors. Keep the plane in a travel-friendly 3 piece confguration or fully glue everything down for a basher-friendly rocketship that is easily strapped to the back of a FPV backpack, or on a spare seat of your car.
The wing is built for both analog and digital video links, and we’ve also designed 3D printable customizations that make it the perfect wing to experience and document your FPV adventures!
FEATURES:
- Crash-A-Lot package with extra parts for worry-free flying
- Easy to fly forward-swept FPV wing with huge performance envelope
- Black EPP material with glass fiber camera and motor mounts
- Pre-cut camera, servo, battery, R/C receiver and receiver antenna slots
- Push-to-open equipment bay for R/C and FPV electronics
- Travel-friendly disassembly or fully glued basher configuration are possible
- Oversized pushrods and wing spars for outstanding durability
- Recommended FPV and RX equipment: (NOT INCLUDED)
- FPV: DJI O3/O4, Walksnail or any analog video system
- RX: TBS Crossfire Nano RX Pro or TBS Crossfire Nano RX
FUN FACTORS:
The Chupito was engineered to provide the maximum amount of accessibility and fun while keeping the performance and flight envelope beyond any other wing in its size and weight class. It is the perfect bring-along wing for small (or large) trips, or just as a casual long-range flyer. With the small size and precise response to your inputs you can shoot tight gaps, the unlimited vertical on 6S allows for maneuvers limited only by your imagination, and the battery compartment gives you enough space to install a power system that covers 5km vertical, or 30km horizontal distance – with margin to spare.
If you are starved for speed, we recommend laminating the wings, and speeds of 230km/h will be achievable using the right propellers (bi-blade high pitch). In the air, it’s visually hard to differentiate from a Mojito, but when you place them side-by-side, the reduced complexity and size become apparent. All in all, this wing subscribes to the 80/20 rule, giving you the most bang-for-buck and an insanely fun all-around wing.
BUILD AND APPEARANCE:
The kit comes with assembly required, and no servos (!) installed. From start to finish, you will need less than an hour to put it all together, assuming you’re using TBS electronics (sold separately, or available as a set). If you are starved for speed, we recommend laminating the wings, and speeds of 230km/h will be achievable using the right propellers (bi-blade, high pitch). In the air it’s visually hard to differentiate from a Mojito, but when you place them side-by-side the smaller size become apparent. All in all, this wing subscribes to the 80/20 rule, giving you the most bang-for-buck, and an insanely fun all-around wing.
FEATURES:
- Easy to fly forward-swept FPV wing with huge performance envelope
- Black EPP material with glass fiber camera and motor mounts
- Pre-cut camera, servo, battery, R/C receiver and receiver antenna slots
- Push-to-open equipment bay for R/C and FPV electronics
- Travel-friendly disassembly or fully glued basher configuration possible
- Over dimensioned pushrods and wing spars for great durability
ELECTRONICS:
- TBS Chupito 2207 2000kV motor
- Connector: MT30, 190mm
- Configuration: 12N14P
- Stator diameter: 22mm
- Stator length: 7mm
- Shaft diameter: 4mm (hollow)
- Weight: 29.9g
- Idle current: 1.2A @ 10V
- Max cells: 6S
- Max continuous (with cooling): 1.1kW
- Internal resistance: 69 Ohm
- Max efficiency: 6-9A > 84%
- HQ R37 Gray Propeller (R or L, adjust motor direction using am32.ca)
- TBS Lucid Wing AIO 2-6S
- TBS M10 GPS
- TBS Chupito Servo
- Operating voltage: 4.8V – 6V
- Standby current: <15mA
- Stall current: 4.8V <1A, 6V <1.1A
- Max torque: 4.8V 1.2kgf/cm, 6V 1.3kgf/cm
- No load speed: 4.8V 0.16s/60deg, 6V 0.15/60deg
- Operating temperature range: -10C – 50C
- Weight: 13.5g
LINKS:
PACKAGE CONTENTS:
- 1x TBS Chupito flying wing
- 1x TBS Chupito sticker sheet
- 1x Carbon fiber spars set
- 1x Glass fiber motor mount
- 1x Camera mount
- 1x Metal hardware set
- 1x Extra Foam Body Parts
- 2x Extra Foam Wings
- 1x TBS Chupito Electronics Package
- 2x Servos
- 1x 2207 2000kV Motor
- 1x R37 Gray Propeller
- 1x TBS Lucid Wing AIO 2-6S
- 1x TBS M10 GPS
- 1x Serial/Power Cable for Digital VTX (6P, 350mm) DJIO3/O4
Reviews
There are no reviews yet.